| Features | High Strength, Good Toughness, Corrosion Resistance |
|---|---|
| Outer Diameter | 21.9 - 812.8 Mm |
| Application | Oil And Gas Well, Geothermal Well, Water Well |
| End Finish | Plain End, Threaded And Coupled (T&C), Flush Joint |
| Grade | J55, K55, N80, L80, C90, T95, P110 |
| Length | Customized |
|---|---|
| Alloy Or Not | Alloy |
| Wall Thickness | 1.2-30 |
| Shape | Tube |
| Surface Treatment | Brightness, Acid Pickling |
| Length | Customized |
|---|---|
| Material | Alloy Steel |
| Wall Thickness | 1.2-30 |
| Surface Treatment | Brightness, Acid Pickling |
| Shape | Tube |
| Material | Alloy Steel |
|---|---|
| Application | Boiler, Heat Exchanger, Superheater |
| Size | Customizable |
| Key Word | Alloy Pipe |
| Secondary Or Not | Non-secondary |
| Temperature Resistance | High |
|---|---|
| Size | Customizable |
| Application | Boiler, Heat Exchanger, Superheater |
| Secondary Or Not | Non-secondary |
| Material | Alloy Steel |
| Application | Boiler, Heat Exchanger, Superheater |
|---|---|
| Material | Alloy Steel |
| Third Party Inspection | BV,SGS,ASP |
| Secondary Or Not | Non-secondary |
| Temperature Resistance | High |
| Inspection | Third Party Inspection, Mill Test Certificate, SGS, BV, DNV |
|---|---|
| Thread Pitch | 8, 10, 12, 14, 16, 18, 20 Threads Per Inch |
| Machine Type | Drilling Equipment |
| Connection | Welding |
| Connection Type | EUE, NUE, STC, LTC, BTC |
| Material | K55, N80, L80, P110 |
|---|---|
| Inspection | Third Party Inspection, Mill Test Certificate, SGS, BV, DNV |
| Outer Diameter | 21.9 - 812.8 Mm |
| Surface Treatment | Phosphating, Blackening, Varnishing |
| Connection | Welding |
| Type | Seamless Steel Pipe |
|---|---|
| Thread Form | Round, Buttress, Special Bevel |
| Inspection | Third Party Inspection, Mill Test Certificate, SGS, BV, DNV |
| Machine Type | Drilling Equipment |
| Connection Type | EUE, NUE, STC, LTC, BTC |
| Technique | Cold Rolled Hot Rolled |
|---|---|
| Length | 2000mm/ 2500mm/ 3000mm/ 6000mm/ 12000mm |
| Grade | 301L, 301, 304N, 310S, 410, 316Ti, 316L, 316, 321, 410S, 410L, 430, 309S, 304, 439, 425M, 409L, 904L, 317L |
| Size | 1/4 Inch - 48 Inch |
| Ends | Plain, Beveled,Threaded |