| Production Process | Hot Rolled, Cold Drawn, Cold Rolled, Hot Extrusion |
|---|---|
| Processing Service | Punching, Cutting, Bending |
| Standard | ASTM A106, ASTM A53, API 5L, DIN 17175, GB/T8162, GB/T8163 |
| Steel Thickness | 0.2-100mm |
| Tolerance | ±5%, ±10% |
| Length | Customized |
|---|---|
| Shape | Tube |
| Alloy Or Not | Alloy |
| Material | Alloy Steel |
| Surface Treatment | Brightness, Acid Pickling |
| Surface Finish | Bare ;painting |
|---|---|
| Steel Standard | DIN EN 10210, DIN EN 10219, ASTM A500,ASTM A53,API 5L,BS 1387 |
| Thickness Tolerance | +/- .2% |
| Wall Thk | 0.5-60 Mm |
| Material Type | Carbon Steel,Stainless Steel,Low Alloy Steel,Galvanized Steel |
| Technique | Hot Rolled, Cold Drawn |
|---|---|
| Ends | Plain, Beveled, Threaded |
| Edge | Mill Edge Slit Edge |
| Surface | Anodized,Brushed,Mill Finished,Polished |
| Appllication | Oil/Gas/Fertilizer |
| Length | Range 1 |
|---|---|
| Outside Diameter | 4.500 |
| End Finish | Plain End |
| Connection | External Upset End |
| Grade | J55 |
| Features | High Strength, Good Toughness, Corrosion Resistance |
|---|---|
| Application | Oil And Gas Well, Geothermal Well, Water Well |
| Outer Diameter | 21.9 - 812.8 Mm |
| End Finish | Plain End, Threaded And Coupled (T&C), Flush Joint |
| Thread Type | External Upset Tubing (EUT), Non-Upset Tubing (NUT) |
| Application | Oil And Gas Industry, Chemical Industry, Electric Power Industry, Etc. |
|---|---|
| Certificate | ISO, API, SGS, BV, Etc. |
| Size | OD: 406mm-1626mm; WT: 6mm-50mm |
| Standard | API 5L, ASTM A53, ASTM A252, ASTM A671, ASTM A672 |
| Length | 5.8m, 6m, 11.8m, 12m, Or As Required |
| Secondary Or Not | Non-secondary |
|---|---|
| Material | Alloy Steel |
| Temperature Resistance | High |
| Third Party Inspection | BV,SGS,ASP |
| Application | Boiler, Heat Exchanger, Superheater |
| Thread Pitch | 8, 10, 12, 14, 16, 18, 20 Threads Per Inch |
|---|---|
| Thread Form | Round, Buttress, Special Bevel |
| Inspection | Third Party Inspection, Mill Test Certificate, SGS, BV, DNV |
| Material | K55, N80, L80, P110 |
| Machine Type | Drilling Equipment |
| Material | K55, N80, L80, P110 |
|---|---|
| Standard | API Spec 5CT, ISO 11960 |
| Type | Seamless Steel Pipe |
| Thread Pitch | 8, 10, 12, 14, 16, 18, 20 Threads Per Inch |
| Connection | Welding |